Part 1, Surfboard Bottom Cleaner
-
Our Bio Surf Formula.
-
This is a Hemp based stunningly effective cleaning product. It is an absolutely non-polluting, water-soluble fluid which is straw green in colour.
-
It offers a range of valuable attributes. It is not harmful to surfaces , it is dermatologically harmless, 100% biodegradable and bio-compatible (no negative impact on plant, animal or marine life). In addition containers used to transport and dispense our Surfboard Bottom Cleaner can be re cycled and re-used.
-
Surfboard Bottom Cleaner is a completely organic cleaner which uses a new form of tenside (agents that modify the surface tension of liquids.) The tensides in Surfboard Bottom Cleaner which are created in the most part from hemp oil and yeast, create highly active amphiphilic tensides (both hydrophobic and hydrophilic compounds). These novel tensides allow Surfboard Bottom Cleaner to offer exceptional cleaning power as they reduce surface tensions to 30-20 mN/ms, thus enabling strong pollutants to emulsify to the extent that they are virtually neutralised and this of course reduces the environmental impact of cleaning. Normally only highly polluting cleaning agents can offer such values.
We supply Surfboard Bottom Cleaner as a concentrate. We recommend diluting in fairly warm water at 1;10 ratio (10 parts water 1 part Surfboard Bottom Cleaner concentrate).
|
|
Part 2, Surfboard Bottom Sealer
This is the most important part! Surfboard Bottom Sealer is our sealer that acts as a bonding agent for part 3 .
- It's mineral and ethanol based that removes any left over wax or oil residue and leaves a sealed UV protective invisible hard layer that aids the long last bond with part 3 .
- Once it's cured it leaves an inert, food safe , biodegradable mineral based layer, Surfboard Bottom Sealer is a highly durable coating.
- It requires greater care when preparing for application. To gain maximum performance from this coating, it is important that all target surfaces must be perfectly clean and dry.
- The coating is applied in seconds. Simply wipe Surfboard Bottom Sealer on to the bottom surface and then buff some minutes later.
- It will withstand many tens of thousands of wiping actions.
- A little goes a long long way 1.5ml will cover one layer of a shortboard surfboard , we recommend you apply at least two layers to make sure all parts are covered ( a total of 3ml per short board).
- Once applied you need to leave at least one hour before applying part 3 . However, leaving for 12 hours before applying part 3 will give the highest performance longest lasting results.
|
|
Part 3. Surfboard Bottom Polish
- Eco-friendly, plant and mineral based, hydrophobic polish designed for easy and faster application.
- Creates an ultra-smooth, well-sealed finish with a long-lasting, high-gloss shine
- Makes a durable chemical bond with or Surfboard Bottom Sealer
- Provides superior UV protection for your board
- Does not contain harmful petroleum distillates, Molybdenum MoS2 or PTFE (commonly found in most other polishes and wax products) or harsh solvents
- Keeps your Surfboard bottom cleaner.
- Just wipe Bottom Polish on and off with no waiting for anything to dry
- Gives a deep quality shine
- Lasts more than one full year above the waterline and more than 20 days of hard use below the waterline (2-3 coats will increase performance and durability to more than 30 days below the waterline)
- Highly hydrophobic (repels water, dirt, salt, grime, oil deposits, etc.)
- Very, very fast
|
